For Sale: Mk 14 Mod 0/Mod 1 collection w/tools & spares - M14 Forum

Mk 14 Mod 0/Mod 1 collection w/tools & spares

This is a discussion on Mk 14 Mod 0/Mod 1 collection w/tools & spares within the PX forums, part of the Classifieds category; UPDATE 2: Mod 1 stock was NOT sold due to non-payment. Everything back up for sale as a kit. Refunds issued for all pending sales ...


Go Back   M14 Forum > Classifieds > PX

3Thanks
Reply
 
LinkBack Moderator Tools Display Modes

Old February 7th, 2015, 07:38 PM   #1
Designated Marksman
 
Join Date: Apr 2012
Location: Portland, OR
Posts: 628
Mk 14 Mod 0/Mod 1 collection w/tools & spares

UPDATE 2: Mod 1 stock was NOT sold due to non-payment. Everything back up for sale as a kit. Refunds issued for all pending sales that were dependent on the stock being sold.
UPDATE 1: Most Mod 1 components parted-out... this is basically a Mod 0 package w/spares.

The time has finally come to move on and sell off my M14 collection. This is likely the most complete collection of 'correct' components that will ever be sold for the Mk 14 Mod 0/1 as a package, and many parts have been discontinued or are not easy to obtain.

Rifle itself is approximately a 1.5-2.0 MOA (168/175 gr. FGMM) LRB action, barreled with a SEI Mk14 18" barrel. Hand loads brought it down to ~1 MOA, but I would still call it a 1.5 MOA shooter. When it arrived from SEI, many regular readers of the 'Modern M14' forum may know that it shot poorly. It has been professionally re-crowned and the op-rod guide land has been knurled to bring it down from ~8 MOA to where it sits today. I don't feel that it can be made more precise without a barrel change.

I have divided this package into 5 groups; barreled action, Mod 0 chassis, Mod 1 chassis, tools & spares, and original USGI stock.

Barreled Action:
LRB M14SA Receiver
SEI 18" Mk 14 Standard Profile Barrel (M80HT)
USGI Rear Sight
SEI Bolt Stop
SEI Gas Cylinder (M80HT)
SEI Gas Plug (M80HT)
Sadlak Gas Piston (w/o NM groove)
SEI GLFS
XS Hooded Front Sight
XS Large Aperture Rear Sight Leaf
TRW Bolt
TRW Op-Rod
Sadlak NM Spring Guide
SEI Guide Pin
SEI Trigger/Hammer Pins
TRW Trigger Group (TRW hammer included, but unusable - please inquire)
1x USGI Magazine
6x Check-Mate Magazines
6x Magpul (Black) Loops
Buffer-tech EBR Sling

Mod 0 Chassis:
Sage Mod 0 Chassis
SparrowHawkM14 Dummy Selector (professionally installed by Ted Brown)
Sage Mk 14 Pistol Grip (original)
Falcon/ERGO 4373CB Rail Covers
Knight's Armament Bi-pod Mount
Sage Vertical Fore-grip
Harris 1A2-BRM Bi-pod
Tank's Speedy Knob
SEI Flash Hider
Badger EBR Rings (NSG color)
SCSB (installed on action, pin-screw modification)

Mod 1 Chassis:
Sage Mod 1 Chassis - as issued (extended rails, laser markings, etc.)
Tangodown Rail Covers
Tangodown ACB-4 Bi-pod (FDE color)
Tangodown Vertical Fore-grip
SureFire FH762KM14 Flash Hider (still in package)
Larue LT-608 Scope Mount
Nightforce A118 Rings
USGI Clip Guide (not installed on action)
Magpul CTR Buttstock
Magpul 1.25" Cheek Riser
VLTOR RE-2 Extension Tube

Tools & Spares:
USGI Tool (original, NOT the Bondhus multi-tool)
Sadlak Gas Cylinder Wrench
Badger Bolt Roller Greaser
Brownells Flash Hider Tool
Drill Bits - 3 sizes (Gas System Cleaning Tools)
USGI Flash Hider - has not been NM reamed, could use a refinish
USGI Front Sight - Standard and Intermediate (fairly rare) width
Commercial Front Sight - NM width
USGI Spring Guide Pin
USGI Trigger/Hammer Pins
USGI Rear Sight Leaf - Standard
USGI Bolt Stop
USGI Gas Cylinder - finish wear, but not pitted
USGI Gas Lock
USGI Gas Plug - worn, still serviceable
SEI Gas Piston - older model, works fine but was only tested for ~40 rounds

USGI Stock:
USGI Stock - I think it's birch; decent condition
USGI Hand Guard
USGI Barrel Band
USGI Op-Rod Guide
Badger Stock Liner Tool








Pictured Nightforce scope is NOT included, but the rings/mount are! Photos of non-pictured items available upon request. If there are any doubt in part numbers, please ask, or see the link in my signature - if it's in the spreadsheet, it is more than likely the part on my rifle.

Things that are missing to build as-issued rifles:

Leupold Scope (Mod 0) - still available
Laser-etched bolt (Mod 0) - never commercially available, but can be found

Nightforce Scope (Mod 1) - discontinued
Dummy Selector (Mod 1) - still available
Docter Optic MS01 3.5 MOA (Mod 1) - discontinued
Wilcox Red-Dot Mount 35101P01 (Mod 1) - still available
SureFire 762K-DE Suppressor (Mod 1) - discontinued/limited-production
Eagle Ind. FNH-ESS 1.25-DEB Sling (Mod 1) - never commercially available

Parts omitted in the interest of using upgraded components:

SAI 18" Bush Barrel (Mod 0/1)
USGI Spring Guide (Mod 0/1)
USGI Gas Piston (Mod 0/1)

Asking price is $8000 OBO for the entire kit - I am being optimistic so please make reasonable and serious offers, I do have a specific price range in mind for sale. Each sub-group has been priced individually, but at this time, I am not willing to split anything aside from the USGI wood stock group.

Unfortunately, I need to ask for all payments within 48 hours now. I can't afford to get strung along for weeks at a time, potentially missing other interested parties - if you don't have the money or don't intend to complete a purchase, don't make an offer.

Here's a few more photos of how the rifle sits now:



Thanks from mescalito

Last edited by mrsaturn7085; March 4th, 2015 at 10:34 AM.
mrsaturn7085 is offline  
Remove Ads
Old February 7th, 2015, 08:20 PM   #2
Old Salt
 
CNelson's Avatar
 
Join Date: Mar 2010
Location: Land of the free and home of the brave.
Posts: 1,611
I am genuinely and seriously interested in the Sage Mod 1 chassis in issued condition by itself. I know you said you want to keep this all together, but please keep me in mind if you decide to break it up.

Also FYI buffertech has offered the Eagle industries slings for sale:
http://www.buffertech.com/Mk14-EBR-3...OCOM-P176.aspx
http://www.buffertech.com/M1AM14-Tac...e-P161C48.aspx

CNelson is offline  
Old February 7th, 2015, 08:28 PM   #3
Old Salt
 
forceman's Avatar
 
Join Date: Dec 2007
Location: Illinois
Posts: 1,423
If breaking apart I would be interested in the SUREFIRE hider and the Nightforce A118 rings.Please keep me in mind for these if you do decide to split it up.

Thanks from 2012 C14
forceman is offline  
Old February 7th, 2015, 09:30 PM   #4
Designated Marksman
 
Join Date: Apr 2012
Location: Portland, OR
Posts: 628
Quote:
Originally Posted by CNelson View Post
Also FYI buffertech has offered the Eagle industries slings for sale:
http://www.buffertech.com/Mk14-EBR-3...OCOM-P176.aspx
http://www.buffertech.com/M1AM14-Tac...e-P161C48.aspx
The first sling linked is the EBR sling that is included in the sale, the second sling linked is NOT the Mod 1 sling. The correct Mod 1 sling was the contract sling for the SCAR-H, which was a double bungee design, 1.25" width, and made by Eagle for the FNH contract (as indicated by the FNH and 1.25 in the part no.). It is similar to the one that Buffertech sells, but it isn't the same. Here's a picture of the correct Mod 1 sling:



Also - I'm getting bombarded with PMs about splitting this up - everyone really wants the Mod 1 chassis... I'll let everyone know if it happens, but I'm not going to split it past the groups I've listed. The Mod 1 group would be valued over $2000 *if* I do split it up.

mrsaturn7085 is offline  
Old February 7th, 2015, 11:24 PM   #5
Old Salt
 
forceman's Avatar
 
Join Date: Dec 2007
Location: Illinois
Posts: 1,423
Correct me if I am wrong but weren't the Crane as issued MOD 0 rifles built with Pre Patent chassis vs later the patent dated chassis and the MOD 1 rifles built with Gen 1 Chassis not Gen 2. As stated please advise if I am wrong on this.

forceman is offline  
Old February 8th, 2015, 08:09 AM   #6
Old Salt
 
CNelson's Avatar
 
Join Date: Mar 2010
Location: Land of the free and home of the brave.
Posts: 1,611
Force, there were several iterations of the MOD 0, there were the originals that had no markings and the chassis extended to where the front band should be, these had no milling in front of the magazine and no holes drilled into the chassis around the magazine well. It was requested by the end user to make the stock lighter. The second generation the chassis was shortened to where it sits now by the end of the gas cylinder these were marked. A third run incorporated the holes around the magazine body, and improved "weldment" for the collapsing stock, and had more milling done, evidenced by a small oval milled away in front of the magazine well, these were also marked.

CNelson is offline  
Old February 8th, 2015, 12:16 PM   #7
Designated Marksman
 
Join Date: Apr 2012
Location: Portland, OR
Posts: 628
Forceman - the initial batch of Mod 0 rifles used the longer stock, yes. They had a different Kydex handguard that allowed access to the lower op-rod guide block screw, as well. All the later pictures of Mod 0 rifles seem to indicate that at some point, the newer stock was retrofitted.

I have priced the package with respect to the rarity of the individual components.

Also, I will PM you regarding Mod 1 stock.

PMs replied - regarding splitting the sale, I have mentioned that I will not break the subgroups I have listed. If you are interested in any one of them (groups - NOT individual onesie twosie items), PM me a private offer and I will keep it in mind in case I decide to break things up. I'm a firm believer of the saying "not everything is for sale, but everything has a price".

-Steve


Last edited by mrsaturn7085; February 8th, 2015 at 12:27 PM.
mrsaturn7085 is offline  
Old February 11th, 2015, 01:41 PM   #8
Designated Marksman
 
Join Date: Apr 2012
Location: Portland, OR
Posts: 628
Got a few pending offers on parts floating around, but nothing finalized - still up for sale.

mrsaturn7085 is offline  
Old February 17th, 2015, 08:50 AM   #9
Designated Marksman
 
Join Date: Apr 2012
Location: Portland, OR
Posts: 628
To the top.

mrsaturn7085 is offline  
Old February 17th, 2015, 10:49 AM   #10
Designated Marksman
 
Join Date: Apr 2012
Location: Portland, OR
Posts: 628
IGNORE THIS POST - BUYER OF MOD 1 STOCK DID NOT PAY, FULL KIT IS BACK UP FOR SALE

Parting-out Mod 1 kit as follows:

Mod 1 Chassis:
Sage Mod 1 Chassis - as issued (extended rails, laser markings, etc.) private offer - pending funds
Tangodown Rail Covers
Tangodown ACB-4 Bi-pod (FDE color) private offer - pending funds
Tangodown Vertical Fore-grip
SureFire FH762KM14 Flash Hider (still in package) forceman - pending funds
Larue LT-608 Scope Mount Cacky32 - pending funds
Nightforce A118 Rings forceman - pending funds
USGI Clip Guide (not installed on action)
Magpul CTR Buttstock private offer - pending funds
Magpul 1.25" Cheek Riser private offer - pending funds
VLTOR RE-2 Extension Tube private offer - pending funds

Rebuilt the rifle as a Mod 0 and will re-list pictures appropriately.


Last edited by mrsaturn7085; March 4th, 2015 at 09:46 AM.
mrsaturn7085 is offline  
Old February 23rd, 2015, 02:49 AM   #11
Newbie
 
Join Date: Feb 2015
Location: Houston, TX
Posts: 3
I'll take the LT-608 if you are parting out

Cacky32 is offline  
Old February 24th, 2015, 10:21 AM   #12
Designated Marksman
 
Join Date: Apr 2012
Location: Portland, OR
Posts: 628
Only things left from the Mod 1 'kit' are the Tangodown Rail Covers and VFG, and the clip guide (which will probably just join the spare parts).

The A118 rings are available if forceman doesn't want them, but I'm considering them sold, pending funds until I hear otherwise.

mrsaturn7085 is offline  
Old February 24th, 2015, 11:14 AM   #13
Old Salt
 
delong31's Avatar
 
Join Date: Dec 2008
Location: DFW, TX
Posts: 1,767

Awards Showcase

Quote:
Originally Posted by mrsaturn7085 View Post
Parting-out Mod 1 kit as follows:
SureFire FH762KM14 Flash Hider (still in package) forceman - pending funds
ugh. I should've ignored your statement on selling as package and asked about this part separately.

delong31 is offline  
Old February 24th, 2015, 12:02 PM   #14
Designated Marksman
 
Join Date: Apr 2012
Location: Portland, OR
Posts: 628
Eh, it was spoken for within an hour - sorry!

Thanks from delong31
mrsaturn7085 is offline  
Old February 28th, 2015, 11:28 AM   #15
Designated Marksman
 
Join Date: Apr 2012
Location: Portland, OR
Posts: 628
Cacky32 and forceman - please check PMs regarding your items purchased.

Fng361 - if you're still monitoring this thread, please contact me ASAP.

mrsaturn7085 is offline  
Reply

  M14 Forum > Classifieds > PX



Search tags for this page
best mk 14 mod 0 on the market
,
eagle fnh-ess 1.25 sling
,
eagle ind. fnh-ess 1.25-deb
,
fh762km14 without markings
,

mk 14 for sale

,
mk 14 mod 1
,
mk 14 rifle for sale
,
speedy knob
Click on a term to search for related topics.

Moderator Tools
Display Modes


Similar M14 Forum Discussions
Thread Thread Starter Forum Replies Last Post
Ammo Collection pistolerom14 Ammunition 9 January 12th, 2014 03:43 PM
For Sale: MK14 NSG Mod O Type SEI (Lord of Wars) sam68 PX 5 March 22nd, 2013 06:15 PM
Sage Mod 0 and Mod 1 Range Report Ragincajun1919 Modern M14 31 February 11th, 2011 05:18 PM
Sage Mod 0 or Mod 1 USMC524 Modern M14 24 March 18th, 2010 03:38 PM
S&W Mod 29-3 added to my collection glockshot Handguns 3 July 20th, 2006 12:14 PM



Top Gun Sites Top Sites List